Tapping Sheet Metal Screws
Tapping Screws are also referred to as sheet metal screws. The 'Type A' is a course thread and 'Type AB' is a fine thread, both are threaded to the very tip of the screw. These are called tapping screws because they can tap its own hole as it is driven into the material. Usually used in relatively soft materials or sheet materials.
Sort By:
Filters:
Measurement System
Drive / Head
Diameter
Length
Finish
Page {pageNumber} of {pagesNumber}
- F-66010
- #6 X 1/4 ZINC PLATED SLOTTED HEX WASHER HEAD TAPPING SCREW TYPE AB
- D
- 0
- Weight: 0.0016100
| Measurement System: | ImperialImperial |
| Drive / Head: | Slotted Hex Washer HeadSlotted Hex Washer Head |
| Diameter: | #6#6 |
| Length: | 1/4"1/4" |
| Finish: | ZincZinc |
- F-66012
- #6 X 1/2 ZINC PLATED SLOTTED HEX WASHER HEAD TAPPING SCREW TYPE AB
- E
- 0
- Weight: 0.0023100
| Measurement System: | ImperialImperial |
| Drive / Head: | Slotted Hex Washer HeadSlotted Hex Washer Head |
| Diameter: | #6#6 |
| Length: | 1/2"1/2" |
| Finish: | ZincZinc |
- F-66024
- #7 X 3/4 ZINC PLATED SLOTTED HEX WASHER HEAD TAPPING SCREW TYPE A
- G
- 0
- Weight: 0.0037700
| Measurement System: | ImperialImperial |
| Drive / Head: | Slotted Hex Washer HeadSlotted Hex Washer Head |
| Diameter: | #7#7 |
| Length: | 3/4"3/4" |
| Finish: | ZincZinc |
- F-66032-L
- #8 X 1/2 ZINC PLATED HEX WASHER HEAD UNSLOTTED TAPPING SCREW TYPE AB
- B
- 0
- Weight: 0.0034800
| Measurement System: | ImperialImperial |
| Drive / Head: | Unslotted Hex Washer HeadUnslotted Hex Washer Head |
| Diameter: | #8#8 |
| Length: | 1/2"1/2" |
| Finish: | ZincZinc |
- F-66034
- #8 X 3/4 ZINC PLATED SLOTTED HEX WASHER HEAD TAPPING SCREW TYPE A
- C
- 0
- Weight: 0.0044300
| Measurement System: | ImperialImperial |
| Drive / Head: | Slotted Hex Washer HeadSlotted Hex Washer Head |
| Diameter: | #8#8 |
| Length: | 3/4"3/4" |
| Finish: | ZincZinc |
- F-66035
- #8 X 1 ZINC PLATED SLOTTED HEX WASHER HEAD TAPPING SCREW TYPE A
- C
- 0
- Weight: 0.0054700
| Measurement System: | ImperialImperial |
| Drive / Head: | Slotted Hex Washer HeadSlotted Hex Washer Head |
| Diameter: | #8#8 |
| Length: | 1"1" |
| Finish: | ZincZinc |
- F-66037
- #8 X 1-1/2 ZINC PLATED SLOTTED HEX WASHER HEAD TAPPING SCREW TYPE A
- E
- 0
- Weight: 0.0075600
| Measurement System: | ImperialImperial |
| Drive / Head: | Slotted Hex Washer HeadSlotted Hex Washer Head |
| Diameter: | #8#8 |
| Length: | 1 1/2"1 1/2" |
| Finish: | ZincZinc |
- F-66052
- #10 X 1/2 ZINC PLATED SLOTTED HEX WASHER HEAD TAPPING SCREW TYPE A
- E
- 0
- Weight: 0.0050500
| Measurement System: | ImperialImperial |
| Drive / Head: | Slotted Hex Washer HeadSlotted Hex Washer Head |
| Diameter: | #10#10 |
| Length: | 1/2"1/2" |
| Finish: | ZincZinc |
- F-66054
- #10 X 3/4 ZINC PLATED SLOTTED HEX WASHER HEAD TAPPING SCREW TYPE A
- C
- 0
- Weight: 0.0061900
| Measurement System: | ImperialImperial |
| Drive / Head: | Slotted Hex Washer HeadSlotted Hex Washer Head |
| Diameter: | #10#10 |
| Length: | 3/4"3/4" |
| Finish: | ZincZinc |
- F-66055
- #10 X 1 ZINC PLATED SLOTTED HEX WASHER HEAD TAPPING SCREW TYPE A
- D
- 0
- Weight: 0.0074500
| Measurement System: | ImperialImperial |
| Drive / Head: | Slotted Hex Washer HeadSlotted Hex Washer Head |
| Diameter: | #10#10 |
| Length: | 1"1" |
| Finish: | ZincZinc |
- F-66056
- #10 X 1-1/4 ZINC PLATED SLOTTED HEX WASHER HEAD TAPPING SCREW TYPE A
- E
- 0
- Weight: 0.0087100
| Measurement System: | ImperialImperial |
| Drive / Head: | Slotted Hex Washer HeadSlotted Hex Washer Head |
| Diameter: | #10#10 |
| Length: | 1 1/4"1 1/4" |
| Finish: | ZincZinc |
- F-66057
- #10 X 1-1/2 ZINC PLATED SLOTTED HEX WASHER HEAD TAPPING SCREW TYPE A
- E
- 0
- Weight: 0.0099800
| Measurement System: | ImperialImperial |
| Drive / Head: | Slotted Hex Washer HeadSlotted Hex Washer Head |
| Diameter: | #10#10 |
| Length: | 1 1/2"1 1/2" |
| Finish: | ZincZinc |
- F-66059
- #10 X 2 ZINC PLATED SLOTTED HEX WASHER HEAD TAPPING SCREW TYPE A
- C
- 0
- Weight: 0.0125000
| Measurement System: | ImperialImperial |
| Drive / Head: | Slotted Hex Washer HeadSlotted Hex Washer Head |
| Diameter: | #10#10 |
| Length: | 2"2" |
| Finish: | ZincZinc |
- F-66072
- #12 X 1/2 ZINC PLATED SLOTTED HEX WASHER HEAD TAPPING SCREW TYPE AB
- G
- 0
- Weight: 0.0069200
| Measurement System: | ImperialImperial |
| Drive / Head: | Slotted Hex Washer HeadSlotted Hex Washer Head |
| Diameter: | #12#12 |
| Length: | 1/2"1/2" |
| Finish: | ZincZinc |
- F-66074
- #12 X 3/4 ZINC PLATED SLOTTED HEX WASHER HEAD TAPPING SCREW TYPE A
- E
- 0
- Weight: 0.0084900
| Measurement System: | ImperialImperial |
| Drive / Head: | Slotted Hex Washer HeadSlotted Hex Washer Head |
| Diameter: | #12#12 |
| Length: | 3/4"3/4" |
| Finish: | ZincZinc |
- F-66075
- #12 X 1 ZINC PLATED SLOTTED HEX WASHER HEAD TAPPING SCREW TYPE A
- E
- 0
- Weight: 0.0101800
| Measurement System: | ImperialImperial |
| Drive / Head: | Slotted Hex Washer HeadSlotted Hex Washer Head |
| Diameter: | #12#12 |
| Length: | 1"1" |
| Finish: | ZincZinc |
- F-66077
- #12 X 1-1/2 ZINC PLATED SLOTTED HEX WASHER HEAD TAPPING SCREW TYPE A
- D
- 0
- Weight: 0.0138600
| Measurement System: | ImperialImperial |
| Drive / Head: | Slotted Hex Washer HeadSlotted Hex Washer Head |
| Diameter: | #12#12 |
| Length: | 1 1/2"1 1/2" |
| Finish: | ZincZinc |
- F-66092
- #14 X 1/2 ZINC PLATED SLOTTED HEX WASHER HEAD TAPPING SCREW TYPE A
- E
- 0
- Weight: 0.0098500
| Measurement System: | ImperialImperial |
| Drive / Head: | Slotted Hex Washer HeadSlotted Hex Washer Head |
| Diameter: | #14#14 |
| Length: | 1/2"1/2" |
| Finish: | ZincZinc |
- F-66094
- #14 X 3/4 ZINC PLATED SLOTTED HEX WASHER HEAD TAPPING SCREW
- B
- 0
- Weight: 0.0120800
| Measurement System: | ImperialImperial |
| Drive / Head: | Slotted Hex Washer HeadSlotted Hex Washer Head |
| Diameter: | #14#14 |
| Length: | 3/4"3/4" |
| Finish: | ZincZinc |
- F-66094L
- #14 X 3/4 ZINC PLATED HEX WASHER HEAD UNSLOTTED TAPPING SCREW TYPE AB
- A
- 0
- Weight: 0.0130000
| Measurement System: | ImperialImperial |
| Drive / Head: | Unslotted Hex Washer HeadUnslotted Hex Washer Head |
| Diameter: | #14#14 |
| Length: | 3/4"3/4" |
| Finish: | ZincZinc |
- F-66095
- #14 X 1 ZINC PLATED SLOTTED HEX WASHER HEAD TAPPING SCREW
- C
- 0
- Weight: 0.0165300
| Measurement System: | ImperialImperial |
| Drive / Head: | Slotted Hex Washer HeadSlotted Hex Washer Head |
| Diameter: | #14#14 |
| Length: | 1"1" |
| Finish: | ZincZinc |
- F-66095L
- 1/4 X 1 ZINC PLATED HEX WASHER HEAD UNSLOTTED TAPPING SCREW TYPE AB
- A
- 0
- Weight: 0.0140000
| Measurement System: | ImperialImperial |
| Drive / Head: | Unslotted Hex Washer HeadUnslotted Hex Washer Head |
| Diameter: | 1/41/4 |
| Length: | 1"1" |
| Finish: | ZincZinc |
- F-66096
- #14 X 1-1/4 ZINC PLATED SLOTTED HEX WASHER HEAD TAPPING SCREW TYPE A
- D
- 0
- Weight: 0.0016680
| Measurement System: | ImperialImperial |
| Drive / Head: | Slotted Hex Washer HeadSlotted Hex Washer Head |
| Diameter: | #14#14 |
| Length: | 1 1/4"1 1/4" |
| Finish: | ZincZinc |
- F-66096L
- #14 X 1-1/4 ZINC PLATED HEX WASHER HEAD UNSLOTTED TAPPING SCREW TYPE AB
- A
- 0
- Weight: 0.0168000
| Measurement System: | ImperialImperial |
| Drive / Head: | Unslotted Hex Washer HeadUnslotted Hex Washer Head |
| Diameter: | #14#14 |
| Length: | 1 1/4"1 1/4" |
| Finish: | ZincZinc |
- F-66097
- #14 X 1-1/2 ZINC PLATED SLOTTED HEX WASHER HEAD TAPPING SCREW TYPE A
- G
- 0
- Weight: 0.0190000
| Measurement System: | ImperialImperial |
| Drive / Head: | Slotted Hex Washer HeadSlotted Hex Washer Head |
| Diameter: | #14#14 |
| Length: | 1 1/2"1 1/2" |
| Finish: | ZincZinc |
- F-66097L
- #14 X 1-1/2 ZINC PLATED HEX WASHER HEAD UNSLOTTED TAPPING SCREW TYPE AB
- B
- 0
- Weight: 0.0191000
| Measurement System: | ImperialImperial |
| Drive / Head: | Unslotted Hex Washer HeadUnslotted Hex Washer Head |
| Diameter: | #14#14 |
| Length: | 1 1/2"1 1/2" |
| Finish: | ZincZinc |
- F-66099
- #14 X 2 ZINC PLATED SLOTTED HEX WASHER HEAD TAPPING SCREW TYPE A
- C
- 0
- Weight: 0.0236000
| Measurement System: | ImperialImperial |
| Drive / Head: | Slotted Hex Washer HeadSlotted Hex Washer Head |
| Diameter: | #14#14 |
| Length: | 2"2" |
| Finish: | ZincZinc |
- F-66101
- #14 X 2-1/2 ZINC PLATED SLOTTED HEX WASHER HEAD TAPPING SCREW TYPE A
- G
- 0
- Weight: 0.0283000
| Measurement System: | ImperialImperial |
| Drive / Head: | Slotted Hex Washer HeadSlotted Hex Washer Head |
| Diameter: | #14#14 |
| Length: | 2 1/2"2 1/2" |
| Finish: | ZincZinc |
- F-66103
- #14 X 3 ZINC PLATED SLOTTED HEX WASHER HEAD TAPPING SCREW TYPE A
- B
- 0
- Weight: 0.0329900
| Measurement System: | ImperialImperial |
| Drive / Head: | Slotted Hex Washer HeadSlotted Hex Washer Head |
| Diameter: | #14#14 |
| Length: | 3"3" |
| Finish: | ZincZinc |
- F-66107
- #14 X 4 ZINC PLATED SLOTTED HEX WASHER HEAD TAPPING SCREW TYPE A
- C
- 0
- Weight: 0.0452200
| Measurement System: | ImperialImperial |
| Drive / Head: | Slotted Hex Washer HeadSlotted Hex Washer Head |
| Diameter: | #14#14 |
| Length: | 4"4" |
| Finish: | ZincZinc |
- F-66211
- 5/16 X 1 ZINC PLATED HEX WASHER HEAD UNSLOTTED TAPPING SCREW
- E
- 0
- Weight: 0.0273400
| Measurement System: | ImperialImperial |
| Drive / Head: | Unslotted Hex Washer HeadUnslotted Hex Washer Head |
| Diameter: | 5/16"5/16" |
| Length: | 1"1" |
| Finish: | ZincZinc |
- F-66213
- 5/16 X 1-1/2 ZINC PLATED HEX WASHER HEAD UNSLOTTED TAPPING SCREW TYPE A
- D
- 0
- Weight: 0.0363800
| Measurement System: | ImperialImperial |
| Drive / Head: | Unslotted Hex Washer HeadUnslotted Hex Washer Head |
| Diameter: | 5/16"5/16" |
| Length: | 1 1/2"1 1/2" |
| Finish: | ZincZinc |
- F-66302
- #4 X 1/2 ZINC PLATED PHILLIPS FLAT HEAD TAPPING SCREW TYPE AB
- G
- 0
- Weight: 0.0010100
| Measurement System: | ImperialImperial |
| Drive / Head: | Phillips Flat HeadPhillips Flat Head |
| Diameter: | #4#4 |
| Length: | 1/2"1/2" |
| Finish: | ZincZinc |
- F-66306
- #5 X 5/8 ZINC PLATED PHILLIPS FLAT HEAD TAPPING SCREW TYPE AB
- C
- 0
- Weight: 0.0017900
| Measurement System: | ImperialImperial |
| Drive / Head: | Phillips Flat HeadPhillips Flat Head |
| Diameter: | #5#5 |
| Length: | 5/8"5/8" |
| Finish: | ZincZinc |
- F-66306-B
- #5 X 5/8 BLACK OXIDE PHILLIPS FLAT HEAD TAPPING SCREW
- C
- 0
- Weight: 0.0016000
| Measurement System: | ImperialImperial |
| Drive / Head: | Phillips Flat HeadPhillips Flat Head |
| Diameter: | #5#5 |
| Length: | 5/8"5/8" |
| Finish: | Black OxideBlack Oxide |
- F-66313
- #6 X 5/8 ZINC PLATED PHILLIPS FLAT HEAD TAPPING SCREW TYPE A
- C
- 0
- Weight: 0.0020700
| Measurement System: | ImperialImperial |
| Drive / Head: | Phillips Flat HeadPhillips Flat Head |
| Diameter: | #6#6 |
| Length: | 5/8"5/8" |
| Finish: | ZincZinc |
- F-66313W
- #6 X 5/8 ZINC PLATED PHILLIPS FLAT HEAD TAPPING SCREW - W/ WHITE PAINTED HEAD (PCT80303)
- C
- 0
- Weight: 0.0019000
| Measurement System: | ImperialImperial |
| Drive / Head: | Phillips Flat HeadPhillips Flat Head |
| Diameter: | #6#6 |
| Length: | 5/8"5/8" |
| Finish: | ZincZinc |
- F-66314
- #6 X 3/4 ZINC PLATED PHILLIPS FLAT HEAD TAPPING SCREW TYPE A
- G
- 0
- Weight: 0.0023400
| Measurement System: | ImperialImperial |
| Drive / Head: | Phillips Flat HeadPhillips Flat Head |
| Diameter: | #6#6 |
| Length: | 3/4"3/4" |
| Finish: | ZincZinc |
- F-66314-W
- #6 X 3/4 ZINC PLATED PHILLIPS FLAT HEAD TAPPING SCREW WITH WHITE HEAD
- G
- 0
- Weight: 0.0023400
| Measurement System: | ImperialImperial |
| Drive / Head: | Phillips Flat HeadPhillips Flat Head |
| Diameter: | #6#6 |
| Length: | 3/4"3/4" |
| Finish: | ZincZinc |
- F-66317
- #6 X 1-1/2 ZINC PLATED PHILLIPS FLAT HEAD TAPPING SCREW TYPE A
- B
- 0
- Weight: 0.0043600
| Measurement System: | ImperialImperial |
| Drive / Head: | Phillips Flat HeadPhillips Flat Head |
| Diameter: | #6#6 |
| Length: | 1 1/2"1 1/2" |
| Finish: | ZincZinc |
- F-66319
- #6 X 2 ZINC PLATED PHILLIPS FLAT HEAD TAPPING SCREW TYPE A
- C
- 0
- Weight: 0.0059000
| Measurement System: | ImperialImperial |
| Drive / Head: | Phillips Flat HeadPhillips Flat Head |
| Diameter: | #6#6 |
| Length: | 2"2" |
| Finish: | ZincZinc |
- F-66319-B
- #6 X 2 BLACK OXIDE PHILLIPS FLAT HEAD TAPPING SCREW TYPE A
- D
- 0
- Weight: 0.0057000
| Measurement System: | ImperialImperial |
| Drive / Head: | Phillips Flat HeadPhillips Flat Head |
| Diameter: | #6#6 |
| Length: | 2"2" |
| Finish: | Black OxideBlack Oxide |
- F-66331
- #8 X 3/8 ZINC PLATED PHILLIPS FLAT HEAD TAPPING SCREW TYPE AB
- C
- 0
- Weight: 0.0022500
| Measurement System: | ImperialImperial |
| Drive / Head: | Phillips Flat HeadPhillips Flat Head |
| Diameter: | #8#8 |
| Length: | 3/8"3/8" |
| Finish: | ZincZinc |
- F-66332
- #8 X 1/2 ZINC PLATED PHILLIPS FLAT HEAD TAPPING SCREW TYPE A
- D
- 0
- Weight: 0.0025800
| Measurement System: | ImperialImperial |
| Drive / Head: | Phillips Flat HeadPhillips Flat Head |
| Diameter: | #8#8 |
| Length: | 1/2"1/2" |
| Finish: | ZincZinc |
- F-66334
- #8 X 3/4 ZINC PLATED PHILLIPS FLAT HEAD TAPPING SCREW TYPE A
- E
- 0
- Weight: 0.0034800
| Measurement System: | ImperialImperial |
| Drive / Head: | Phillips Flat HeadPhillips Flat Head |
| Diameter: | #8#8 |
| Length: | 3/4"3/4" |
| Finish: | ZincZinc |
- F-66335
- #8 X 1 ZINC PLATED PHILLIPS FLAT HEAD TAPPING SCREW TYPE A
- C
- 0
- Weight: 0.0046300
| Measurement System: | ImperialImperial |
| Drive / Head: | Phillips Flat HeadPhillips Flat Head |
| Diameter: | #8#8 |
| Length: | 1"1" |
| Finish: | ZincZinc |
- F-66336
- #8 X 1-1/4 ZINC PLATED PHILLIPS FLAT HEAD TAPPING SCREW TYPE A
- B
- 0
- Weight: 0.0052700
| Measurement System: | ImperialImperial |
| Drive / Head: | Phillips Flat HeadPhillips Flat Head |
| Diameter: | #8#8 |
| Length: | 1 1/4"1 1/4" |
| Finish: | ZincZinc |
- F-66337
- #8 X 1-1/2 ZINC PLATED PHILLIPS FLAT HEAD TAPPING SCREW TYPE A
- C
- 0
- Weight: 0.0062600
| Measurement System: | ImperialImperial |
| Drive / Head: | Phillips Flat HeadPhillips Flat Head |
| Diameter: | #8#8 |
| Length: | 1 1/2"1 1/2" |
| Finish: | ZincZinc |
- F-66338
- #8 X 1-3/4 ZINC PLATED PHILLIPS FLAT HEAD TAPPING SCREW TYPE A
- B
- 0
- Weight: 0.0073600
| Measurement System: | ImperialImperial |
| Drive / Head: | Phillips Flat HeadPhillips Flat Head |
| Diameter: | #8#8 |
| Length: | 1 3/4"1 3/4" |
| Finish: | ZincZinc |
- F-66339
- #8 X 2 ZINC PLATED PHILLIPS FLAT HEAD TAPPING SCREW TYPE A
- C
- 0
- Weight: 0.0082700
| Measurement System: | ImperialImperial |
| Drive / Head: | Phillips Flat HeadPhillips Flat Head |
| Diameter: | #8#8 |
| Length: | 2"2" |
| Finish: | ZincZinc |
- F-66339-AB-B
- #8-18 X 2 BLACK OXIDE PHILLIPS FLAT HEAD TAPPING SCREW TYPE AB
- E
- 0
- Weight: 0.0082000
| Measurement System: | ImperialImperial |
| Drive / Head: | Phillips Flat HeadPhillips Flat Head |
| Diameter: | #8#8 |
| Length: | 2"2" |
| Finish: | Black OxideBlack Oxide |
- F-66352
- #10 X 1/2 ZINC PLATED PHILLIPS FLAT HEAD TAPPING SCREW TYPE AB
- A
- 0
- Weight: 0.0034000
| Measurement System: | ImperialImperial |
| Drive / Head: | Phillips Flat HeadPhillips Flat Head |
| Diameter: | #10#10 |
| Length: | 1/2"1/2" |
| Finish: | ZincZinc |
- F-66354
- #10 X 3/4 ZINC PLATED PHILLIPS FLAT HEAD TAPPING SCREW TYPE A
- E
- 0
- Weight: 0.0046500
| Measurement System: | ImperialImperial |
| Drive / Head: | Phillips Flat HeadPhillips Flat Head |
| Diameter: | #10#10 |
| Length: | 3/4"3/4" |
| Finish: | ZincZinc |
- F-66358
- #10 X 1-3/4 ZINC PLATED PHILLIPS FLAT HEAD TAPPING SCREW TYPE A
- G
- 0
- Weight: 0.0097900
| Measurement System: | ImperialImperial |
| Drive / Head: | Phillips Flat HeadPhillips Flat Head |
| Diameter: | #10#10 |
| Length: | 1 3/4"1 3/4" |
| Finish: | ZincZinc |
- F-66359
- #10 X 2 ZINC PLATED PHILLIPS FLAT HEAD TAPPING SCREW TYPE A
- E
- 0
- Weight: 0.0107100
| Measurement System: | ImperialImperial |
| Drive / Head: | Phillips Flat HeadPhillips Flat Head |
| Diameter: | #10#10 |
| Length: | 2"2" |
| Finish: | ZincZinc |
- F-66359-AB-B
- #10 X 2 BLACK OXIDE PHILLIPS FLAT HEAD TAPPING SCREW TYPE AB
- D
- 0
- Weight: 0.0108000
| Measurement System: | ImperialImperial |
| Drive / Head: | Phillips Flat HeadPhillips Flat Head |
| Diameter: | #10#10 |
| Length: | 2"2" |
| Finish: | Black OxideBlack Oxide |
- F-66360
- #10 X 2-1/4 ZINC PLATED PHILLIPS FLAT HEAD TAPPING SCREW TYPE A
- E
- 0
- Weight: 0.0121200
| Measurement System: | ImperialImperial |
| Drive / Head: | Phillips Flat HeadPhillips Flat Head |
| Diameter: | #10#10 |
| Length: | 2 1/4"2 1/4" |
| Finish: | ZincZinc |
- F-66361
- #10 X 2-1/2 ZINC PLATED PHILLIPS FLAT HEAD TAPPING SCREW TYPE A
- G
- 0
- Weight: 0.0135100
| Measurement System: | ImperialImperial |
| Drive / Head: | Phillips Flat HeadPhillips Flat Head |
| Diameter: | #10#10 |
| Length: | 2 1/2"2 1/2" |
| Finish: | ZincZinc |
- F-66363
- #10 X 3 ZINC PLATED PHILLIPS FLAT HEAD TAPPING SCREW TYPE A
- G
- 0
- Weight: 0.0160900
| Measurement System: | ImperialImperial |
| Drive / Head: | Phillips Flat HeadPhillips Flat Head |
| Diameter: | #10#10 |
| Length: | 3"3" |
| Finish: | ZincZinc |
- F-66377
- #12 X 1-1/2 ZINC PLATED PHILLIPS FLAT HEAD TAPPING SCREW TYPE A
- E
- 0
- Weight: 0.0114600
| Measurement System: | ImperialImperial |
| Drive / Head: | Phillips Flat HeadPhillips Flat Head |
| Diameter: | #12#12 |
| Length: | 1 1/2"1 1/2" |
| Finish: | ZincZinc |
- F-66379
- #12 X 2 ZINC PLATED PHILLIPS FLAT HEAD TAPPING SCREW TYPE A
- C
- 0
- Weight: 0.0139500
| Measurement System: | ImperialImperial |
| Drive / Head: | Phillips Flat HeadPhillips Flat Head |
| Diameter: | #12#12 |
| Length: | 2"2" |
| Finish: | ZincZinc |
- F-66381
- #12 X 2-1/2 ZINC PLATED PHILLIPS FLAT HEAD TAPPING SCREW TYPE A
- C
- 0
- Weight: 0.0180300
| Measurement System: | ImperialImperial |
| Drive / Head: | Phillips Flat HeadPhillips Flat Head |
| Diameter: | #12#12 |
| Length: | 2 1/2"2 1/2" |
| Finish: | ZincZinc |
- F-66383
- #12 X 3 ZINC PLATED PHILLIPS FLAT HEAD TAPPING SCREW TYPE A
- C
- 0
- Weight: 0.0212700
| Measurement System: | ImperialImperial |
| Drive / Head: | Phillips Flat HeadPhillips Flat Head |
| Diameter: | #12#12 |
| Length: | 3"3" |
| Finish: | ZincZinc |
- F-66384
- #12 X 3-1/2 ZINC PLATED PHILLIPS FLAT HEAD TAPPING SCREW TYPE A
- C
- 0
- Weight: 0.0262100
| Measurement System: | ImperialImperial |
| Drive / Head: | Phillips Flat HeadPhillips Flat Head |
| Diameter: | #12#12 |
| Length: | 3 1/2"3 1/2" |
| Finish: | ZincZinc |
- F-66394
- 1/4 X 3/4 ZINC PLATED PHILLIPS FLAT HEAD TAPPING SCREW TYPE A
- G
- 0
- Weight: 0.0091000
| Measurement System: | ImperialImperial |
| Drive / Head: | Phillips Flat HeadPhillips Flat Head |
| Diameter: | 1/41/4 |
| Length: | 3/4"3/4" |
| Finish: | ZincZinc |
- F-66395
- 1/4 X 1 ZINC PLATED PHILLIPS FLAT HEAD TAPPING SCREW TYPE A
- G
- 0
- Weight: 0.0110200
| Measurement System: | ImperialImperial |
| Drive / Head: | Phillips Flat HeadPhillips Flat Head |
| Diameter: | 1/41/4 |
| Length: | 1"1" |
| Finish: | ZincZinc |
- F-66396
- 1/4 X 1-1/4 ZINC PLATED PHILLIPS FLAT HEAD TAPPING SCREW TYPE A
- B
- 0
- Weight: 0.0132200
| Measurement System: | ImperialImperial |
| Drive / Head: | Phillips Flat HeadPhillips Flat Head |
| Diameter: | 1/41/4 |
| Length: | 1 1/4"1 1/4" |
| Finish: | ZincZinc |
- F-66397
- 1/4 X 1-1/2 ZINC PLATED PHILLIPS FLAT HEAD TAPPING SCREW TYPE A
- C
- 0
- Weight: 0.0156500
| Measurement System: | ImperialImperial |
| Drive / Head: | Phillips Flat HeadPhillips Flat Head |
| Diameter: | 1/41/4 |
| Length: | 1 1/2"1 1/2" |
| Finish: | ZincZinc |
- F-66399
- 1/4 X 2 ZINC PLATED PHILLIPS FLAT HEAD TAPPING SCREW TYPE A
- C
- 0
- Weight: 0.0198400
| Measurement System: | ImperialImperial |
| Drive / Head: | Phillips Flat HeadPhillips Flat Head |
| Diameter: | 1/41/4 |
| Length: | 2"2" |
| Finish: | ZincZinc |
- F-66401
- 1/4 X 2-1/2 ZINC PLATED PHILLIPS FLAT HEAD TAPPING SCREW TYPE A
- B
- 0
- Weight: 0.0240200
| Measurement System: | ImperialImperial |
| Drive / Head: | Phillips Flat HeadPhillips Flat Head |
| Diameter: | 1/41/4 |
| Length: | 2 1/2"2 1/2" |
| Finish: | ZincZinc |
- F-66401-B
- 1/4 X 2-1/2 BLACK OXIDE PHILLIPS FLAT HEAD TAPPING SCREW TYPE A
- C
- 0
- Weight: 0.0233000
| Measurement System: | ImperialImperial |
| Drive / Head: | Phillips Flat HeadPhillips Flat Head |
| Diameter: | 1/41/4 |
| Length: | 2 1/2"2 1/2" |
| Finish: | Black OxideBlack Oxide |
- F-66403
- 1/4 X 3 ZINC PLATED PHILLIPS FLAT HEAD TAPPING SCREW TYPE A
- D
- 0
- Weight: 0.0277900
| Measurement System: | ImperialImperial |
| Drive / Head: | Phillips Flat HeadPhillips Flat Head |
| Diameter: | 1/41/4 |
| Length: | 3"3" |
| Finish: | ZincZinc |
- F-66532
- #8 X 1/2 ZINC PLATED PHILLIPS OVAL HEAD TAPPING SCREW
- G
- 0
- Weight: 0.0033100
| Measurement System: | ImperialImperial |
| Drive / Head: | Phillips Oval HeadPhillips Oval Head |
| Diameter: | #8#8 |
| Length: | 1/2"1/2" |
| Finish: | ZincZinc |
- F-66534
- #8 X 3/4 ZINC PLATED PHILLIPS OVAL HEAD TAPPING SCREW
- G
- 0
- Weight: 0.0041900
| Measurement System: | ImperialImperial |
| Drive / Head: | Phillips Oval HeadPhillips Oval Head |
| Diameter: | #8#8 |
| Length: | 3/4"3/4" |
| Finish: | ZincZinc |
- F-66535
- #8 X 1 ZINC PLATED PHILLIPS OVAL HEAD TAPPING SCREW
- G
- 0
- Weight: 0.0052000
| Measurement System: | ImperialImperial |
| Drive / Head: | Phillips Oval HeadPhillips Oval Head |
| Diameter: | #8#8 |
| Length: | 1"1" |
| Finish: | ZincZinc |
- F-66538
- #8 X 1-3/4 ZINC PLATED PHILLIPS OVAL HEAD TAPPING SCREW
- G
- 0
- Weight: 0.0081100
| Measurement System: | ImperialImperial |
| Drive / Head: | Phillips Oval HeadPhillips Oval Head |
| Diameter: | #8#8 |
| Length: | 1 3/4"1 3/4" |
| Finish: | ZincZinc |
- F-66554
- #10 X 3/4 ZINC PLATED PHILLIPS OVAL HEAD TAPPING SCREW
- G
- 0
- Weight: 0.0059100
| Measurement System: | ImperialImperial |
| Drive / Head: | Phillips Oval HeadPhillips Oval Head |
| Diameter: | #10#10 |
| Length: | 3/4"3/4" |
| Finish: | ZincZinc |
- F-66555
- #10 X 1 ZINC PLATED PHILLIPS OVAL HEAD TAPPING SCREW
- G
- 0
- Weight: 0.0071000
| Measurement System: | ImperialImperial |
| Drive / Head: | Phillips Oval HeadPhillips Oval Head |
| Diameter: | #10#10 |
| Length: | 1"1" |
| Finish: | ZincZinc |
- F-66800
- #4 X 1/4 ZINC PLATED PHILLIPS PAN HEAD TAPPING SCREW TYPE AB
- C
- 0
- Weight: 0.0009900
| Measurement System: | ImperialImperial |
| Drive / Head: | Phillips Pan HeadPhillips Pan Head |
| Diameter: | #4#4 |
| Length: | 1/4"1/4" |
| Finish: | ZincZinc |
- F-66801
- #4-24 X 3/8 ZINC PLATED PHILLIPS PAN HEAD TAPPING SCREW TYPE AB
- E
- 0
- Weight: 0.0011900
| Measurement System: | ImperialImperial |
| Drive / Head: | Phillips Pan HeadPhillips Pan Head |
| Diameter: | #4#4 |
| Length: | 3/8"3/8" |
| Finish: | ZincZinc |
- F-66802
- #4 X 1/2 ZINC PLATED PHIL PAN HEAD TAPPING SCREW
- G
- 0
- Weight: 0.0012400
| Measurement System: | ImperialImperial |
| Drive / Head: | Square Pan HeadSquare Pan Head |
| Diameter: | #4#4 |
| Length: | 1/2"1/2" |
| Finish: | ZincZinc |
- F-66803
- #4 X 5/8 ZINC PLATED PHILLIPS PAN HEAD TAPPING SCREW TYPE AB
- G
- 0
- Weight: 0.0015900
| Measurement System: | ImperialImperial |
| Drive / Head: | Phillips Pan HeadPhillips Pan Head |
| Diameter: | #4#4 |
| Length: | 5/8"5/8" |
| Finish: | ZincZinc |
- F-66804
- #4 X 3/4 ZINC PLATED PHILLIPS PAN HEAD TAPPING SCREW TYPE AB
- G
- 0
- Weight: 0.0019000
| Measurement System: | ImperialImperial |
| Drive / Head: | Phillips Pan HeadPhillips Pan Head |
| Diameter: | #4#4 |
| Length: | 3/4"3/4" |
| Finish: | ZincZinc |
- F-66805
- #4 X 1 ZINC PLATED PHILLIPS PAN HEAD TAPPING SCREW TYPE AB
- G
- 0
- Weight: 0.0022900
| Measurement System: | ImperialImperial |
| Drive / Head: | Phillips Pan HeadPhillips Pan Head |
| Diameter: | #4#4 |
| Length: | 1"1" |
| Finish: | ZincZinc |
- F-66810
- #6 X 1/4 ZINC PLATED PHILLIPS PAN HEAD TAPPING SCREW
- E
- 0
- Weight: 0.0015900
| Measurement System: | ImperialImperial |
| Drive / Head: | Phillips Pan HeadPhillips Pan Head |
| Diameter: | #6#6 |
| Length: | 1/4"1/4" |
| Finish: | ZincZinc |
- F-66811
- #6 X 3/8 ZINC PLATED PHILLIPS PAN HEAD TAPPING SCREW
- E
- 0
- Weight: 0.0019000
| Measurement System: | ImperialImperial |
| Drive / Head: | Phillips Pan HeadPhillips Pan Head |
| Diameter: | #6#6 |
| Length: | 3/8"3/8" |
| Finish: | ZincZinc |
- F-66812
- #6 X 1/2 ZINC PLATED PHILLIPS PAN HEAD TAPPING SCREW - TYPE A
- C
- 0
- Weight: 0.0022000
| Measurement System: | ImperialImperial |
| Drive / Head: | Phillips Pan HeadPhillips Pan Head |
| Diameter: | #6#6 |
| Length: | 1/2"1/2" |
| Finish: | ZincZinc |
- F-66814
- #6 X 3/4 ZINC PLATED PHILLIPS PAN HEAD TAPPING SCREW
- G
- 0
- Weight: 0.0028900
| Measurement System: | ImperialImperial |
| Drive / Head: | Phillips Pan HeadPhillips Pan Head |
| Diameter: | #6#6 |
| Length: | 3/4"3/4" |
| Finish: | ZincZinc |
- F-66815
- #6 X 1 ZINC PLATED PHILLIPS PAN HEAD TAPPING SCREW
- C
- 0
- Weight: 0.0035900
| Measurement System: | ImperialImperial |
| Drive / Head: | Phillips Pan HeadPhillips Pan Head |
| Diameter: | #6#6 |
| Length: | 1"1" |
| Finish: | ZincZinc |
- F-66817
- #6 X 1-1/2 ZINC PLATED PHILLIPS PAN HEAD TAPPING SCREW
- E
- 0
- Weight: 0.0050000
| Measurement System: | ImperialImperial |
| Drive / Head: | Phillips Pan HeadPhillips Pan Head |
| Diameter: | #6#6 |
| Length: | 1 1/2"1 1/2" |
| Finish: | ZincZinc |
- F-66819
- #6 X 2 ZINC PLATED PHILLIPS PAN HEAD TAPPING SCREW
- G
- 0
- Weight: 0.0061700
| Measurement System: | ImperialImperial |
| Drive / Head: | Phillips Pan HeadPhillips Pan Head |
| Diameter: | #6#6 |
| Length: | 2"2" |
| Finish: | ZincZinc |
- F-66832
- #8 X 1/2 ZINC PLATED PHILLIPS PAN HEAD TAPPING SCREW - TYPE A
- E
- 0
- Weight: 0.0033100
| Measurement System: | ImperialImperial |
| Drive / Head: | Phillips Pan HeadPhillips Pan Head |
| Diameter: | #8#8 |
| Length: | 1/2"1/2" |
| Finish: | ZincZinc |
- F-66834
- #8 X 3/4 ZINC PLATED PHILLIPS PAN HEAD TAPPING SCREW
- D
- 0
- Weight: 0.0041900
| Measurement System: | ImperialImperial |
| Drive / Head: | Phillips Pan HeadPhillips Pan Head |
| Diameter: | #8#8 |
| Length: | 3/4"3/4" |
| Finish: | ZincZinc |
- F-66835
- #8 X 1 ZINC PLATED PHILLIPS PAN HEAD TAPPING SCREW
- C
- 0
- Weight: 0.0052000
| Measurement System: | ImperialImperial |
| Drive / Head: | Phillips Pan HeadPhillips Pan Head |
| Diameter: | #8#8 |
| Length: | 1"1" |
| Finish: | ZincZinc |
- F-66836
- #8 X 1-1/4 ZINC PLATED PHILLIPS PAN HEAD TAPPING SCREW TYPE A
- G
- 0
- Weight: 0.0061900
| Measurement System: | ImperialImperial |
| Drive / Head: | Phillips Pan HeadPhillips Pan Head |
| Diameter: | #8#8 |
| Length: | 1 1/4"1 1/4" |
| Finish: | ZincZinc |
- F-66836-B
- #8 X 1-1/4 BLACK OXIDE PHILLIPS PAN HEAD TAPPING SCREW
- G
- 0
- Weight: 0.0061900
| Measurement System: | ImperialImperial |
| Drive / Head: | Phillips Pan HeadPhillips Pan Head |
| Diameter: | #8#8 |
| Length: | 1 1/4"1 1/4" |
| Finish: | Black OxideBlack Oxide |
- F-66837
- #8 X 1-1/2 ZINC PLATED PHILLIPS PAN HEAD TAPPING SCREW - TYPE AB
- G
- 0
- Weight: 0.0072100
| Measurement System: | ImperialImperial |
| Drive / Head: | Phillips Pan HeadPhillips Pan Head |
| Diameter: | #8#8 |
| Length: | 1 1/2"1 1/2" |
| Finish: | ZincZinc |
- F-66838
- #8 X 1-3/4 ZINC PLATED PHILLIPS PAN HEAD TAPPING SCREW
- G
- 0
- Weight: 0.0081100
| Measurement System: | ImperialImperial |
| Drive / Head: | Phillips Pan HeadPhillips Pan Head |
| Diameter: | #8#8 |
| Length: | 1 3/4"1 3/4" |
| Finish: | ZincZinc |
- F-66841
- #8 X 2-1/2 ZINC PLATED PHILLIPS PAN HEAD TAPPING SCREW
- G
- 0
- Weight: 0.1083300
| Measurement System: | ImperialImperial |
| Drive / Head: | Phillips Pan HeadPhillips Pan Head |
| Diameter: | #8#8 |
| Length: | 2 1/2"2 1/2" |
| Finish: | ZincZinc |
- F-66851
- #10 X 3/8 ZINC PLATED PHILLIPS PAN HEAD TAPPING SCREW
- D
- 0
- Weight: 0.0043000
| Measurement System: | ImperialImperial |
| Drive / Head: | Phillips Pan HeadPhillips Pan Head |
| Diameter: | #10#10 |
| Length: | 3/8"3/8" |
| Finish: | ZincZinc |
- F-66852
- #10 X 1/2 ZINC PLATED PHILLIPS PAN HEAD TAPPING SCREW - TYPE A
- A
- 0
- Weight: 0.0048000
| Measurement System: | ImperialImperial |
| Drive / Head: | Phillips Pan HeadPhillips Pan Head |
| Diameter: | #10#10 |
| Length: | 1/2"1/2" |
| Finish: | ZincZinc |
- F-66853
- #10 X 5/8 ZINC PLATED PHILLIPS PAN HEAD TAPPING SCREW
- B
- 0
- Weight: 0.0054000
| Measurement System: | ImperialImperial |
| Drive / Head: | Phillips Pan HeadPhillips Pan Head |
| Diameter: | #10#10 |
| Length: | 5/8"5/8" |
| Finish: | ZincZinc |
- F-66854
- #10 X 3/4 ZINC PLATED PHILLIPS PAN HEAD TAPPING SCREW
- C
- 0
- Weight: 0.0059100
| Measurement System: | ImperialImperial |
| Drive / Head: | Phillips Pan HeadPhillips Pan Head |
| Diameter: | #10#10 |
| Length: | 3/4"3/4" |
| Finish: | ZincZinc |
- F-66854-B
- #10 X 3/4 BLACK OXIDE PHILLIPS PAN HEAD SHEET METAL SCREW TYPE A
- G
- 0
- Weight: 0.0056200
| Measurement System: | ImperialImperial |
| Drive / Head: | Phillips Pan HeadPhillips Pan Head |
| Diameter: | #10#10 |
| Length: | 3/4"3/4" |
| Finish: | Black OxideBlack Oxide |
- F-66855
- #10 X 1 ZINC PLATED PHILLIPS PAN HEAD TAPPING SCREW
- A
- 0
- Weight: 0.0071000
| Measurement System: | ImperialImperial |
| Drive / Head: | Phillips Pan HeadPhillips Pan Head |
| Diameter: | #10#10 |
| Length: | 1"1" |
| Finish: | ZincZinc |
- F-66857
- #10 X 1-1/2 ZINC PLATED PHILLIPS PAN HEAD TAPPING SCREW
- E
- 0
- Weight: 0.0095000
| Measurement System: | ImperialImperial |
| Drive / Head: | Phillips Pan HeadPhillips Pan Head |
| Diameter: | #10#10 |
| Length: | 1 1/2"1 1/2" |
| Finish: | ZincZinc |
- F-66858
- #10 X 1-3/4 ZINC PLATED PHILLIPS PAN HEAD TAPPING SCREW
- E
- 0
- Weight: 0.0107100
| Measurement System: | ImperialImperial |
| Drive / Head: | Phillips Pan HeadPhillips Pan Head |
| Diameter: | #10#10 |
| Length: | 1 3/4"1 3/4" |
| Finish: | ZincZinc |
- F-66859
- #10 X 2 ZINC PLATED PHILLIPS PAN HEAD TAPPING SCREW
- C
- 0
- Weight: 0.0119000
| Measurement System: | ImperialImperial |
| Drive / Head: | Phillips Pan HeadPhillips Pan Head |
| Diameter: | #10#10 |
| Length: | 2"2" |
| Finish: | ZincZinc |
- F-66872
- #12 X 1/2 ZINC PLATED PHILLIPS PAN HEAD TAPPING SCREW
- E
- 0
- Weight: 0.0061000
| Measurement System: | ImperialImperial |
| Drive / Head: | Phillips Pan HeadPhillips Pan Head |
| Diameter: | #12#12 |
| Length: | 1/2"1/2" |
| Finish: | ZincZinc |
- F-66874
- #12 X 3/4 ZINC PLATED PHILLIPS PAN HEAD TAPPING SCREW
- C
- 0
- Weight: 0.0081100
| Measurement System: | ImperialImperial |
| Drive / Head: | Phillips Pan HeadPhillips Pan Head |
| Diameter: | #12#12 |
| Length: | 3/4"3/4" |
| Finish: | ZincZinc |
- F-66875
- #12 X 1 ZINC PLATED PHILLIPS PAN HEAD TAPPING SCREW - TYPE A
- C
- 0
- Weight: 0.0097000
| Measurement System: | ImperialImperial |
| Drive / Head: | Phillips Pan HeadPhillips Pan Head |
| Diameter: | #12#12 |
| Length: | 1"1" |
| Finish: | ZincZinc |
- F-66876
- #12 X 1-1/4 ZINC PLATED PHILLIPS PAN HEAD TAPPING SCREW
- G
- 0
- Weight: 0.0114600
| Measurement System: | ImperialImperial |
| Drive / Head: | Phillips Pan HeadPhillips Pan Head |
| Diameter: | #12#12 |
| Length: | 1 1/4"1 1/4" |
| Finish: | ZincZinc |
- F-66876-B
- #12 X 1-1/4 BLACK OXIDE PHILLIPS PAN HEAD TAPPING SCREW - TYPE A
- G
- 0
- Weight: 0.0110000
| Measurement System: | ImperialImperial |
| Drive / Head: | Phillips Pan HeadPhillips Pan Head |
| Diameter: | #12#12 |
| Length: | 1 1/4"1 1/4" |
| Finish: | Black OxideBlack Oxide |
- F-66877
- #12 X 1-1/2 ZINC PLATED PHILLIPS PAN HEAD TAPPING SCREW
- G
- 0
- Weight: 0.0132200
| Measurement System: | ImperialImperial |
| Drive / Head: | Phillips Pan HeadPhillips Pan Head |
| Diameter: | #12#12 |
| Length: | 1 1/2"1 1/2" |
| Finish: | ZincZinc |
- F-66879
- #12 X 2 ZINC PLATED PHILLIPS PAN HEAD TAPPING SCREW
- G
- 0
- Weight: 0.0164200
| Measurement System: | ImperialImperial |
| Drive / Head: | Phillips Pan HeadPhillips Pan Head |
| Diameter: | #12#12 |
| Length: | 2"2" |
| Finish: | ZincZinc |
- F-66892
- 1/4 X 1/2 ZINC PLATED PHILLIPS PAN HEAD TAPPING SCREW
- E
- 0
- Weight: 0.0094100
| Measurement System: | ImperialImperial |
| Drive / Head: | Phillips Pan HeadPhillips Pan Head |
| Diameter: | 1/4"1/4" |
| Length: | 1/2"1/2" |
| Finish: | ZincZinc |
- F-66894
- 1/4 X 3/4 ZINC PLATED PHILLIPS PAN HEAD TAPPING SCREW
- C
- 0
- Weight: 0.0115300
| Measurement System: | ImperialImperial |
| Drive / Head: | Phillips Pan HeadPhillips Pan Head |
| Diameter: | 1/41/4 |
| Length: | 3/4"3/4" |
| Finish: | ZincZinc |
- F-66895
- 1/4 X 1 ZINC PLATED PHILLIPS PAN HEAD TAPPING SCREW - TYPE A
- A
- 0
- Weight: 0.0137300
| Measurement System: | ImperialImperial |
| Drive / Head: | Phillips Pan HeadPhillips Pan Head |
| Diameter: | 1/4"1/4" |
| Length: | 1"1" |
| Finish: | ZincZinc |
- F-66896
- 1/4 X 1-1/4 ZINC PLATED PHILLIPS PAN HEAD TAPPING SCREW
- G
- 0
- Weight: 0.0159300
| Measurement System: | ImperialImperial |
| Drive / Head: | Phillips Pan HeadPhillips Pan Head |
| Diameter: | 1/4"1/4" |
| Length: | 1 1/4"1 1/4" |
| Finish: | ZincZinc |
- F-66897
- 1/4 X 1-1/2 ZINC PLATED PHILLIPS PAN HEAD TAPPING SCREW
- B
- 0
- Weight: 0.0181400
| Measurement System: | ImperialImperial |
| Drive / Head: | Phillips Pan HeadPhillips Pan Head |
| Diameter: | 1/4"1/4" |
| Length: | 1 1/2"1 1/2" |
| Finish: | ZincZinc |
- F-66899
- 1/4 X 2 ZINC PLATED PHILLIPS PAN HEAD TAPPING SCREW - TYPE A
- E
- 0
- Weight: 0.0225500
| Measurement System: | ImperialImperial |
| Drive / Head: | Phillips Pan HeadPhillips Pan Head |
| Diameter: | 1/4"1/4" |
| Length: | 2"2" |
| Finish: | ZincZinc |
- F-67032
- #8 X 1/2 ZINC PLATED PHILLIPS TRUSS HEAD TAPPING SCREW
- B
- 0
- Weight: 0.0033100
| Measurement System: | ImperialImperial |
| Drive / Head: | Phillips Truss HeadPhillips Truss Head |
| Diameter: | #8#8 |
| Length: | 1/2"1/2" |
| Finish: | ZincZinc |
- F-67034
- #8 X 3/4 ZINC PLATED PHILLIPS TRUSS HEAD TAPPING SCREW
- G
- 0
- Weight: 0.0041900
| Measurement System: | ImperialImperial |
| Drive / Head: | Phillips Truss HeadPhillips Truss Head |
| Diameter: | #8#8 |
| Length: | 3/4"3/4" |
| Finish: | ZincZinc |
- F-67035
- #8 X 1 ZINC PLATED PHILLIPS TRUSS HEAD TAPPING SCREW
- E
- 0
- Weight: 0.0052000
| Measurement System: | ImperialImperial |
| Drive / Head: | Phillips Truss HeadPhillips Truss Head |
| Diameter: | #8#8 |
| Length: | 1"1" |
| Finish: | ZincZinc |
- F-67036
- #8 X 1-1/4 ZINC PLATED PHILLIPS TRUSS HEAD TAPPING SCREW
- G
- 0
- Weight: 0.0061900
| Measurement System: | ImperialImperial |
| Drive / Head: | Phillips Truss HeadPhillips Truss Head |
| Diameter: | #8#8 |
| Length: | 1 1/4"1 1/4" |
| Finish: | ZincZinc |
- F-67052
- #10 X 1/2 ZINC PLATED PHILLIPS TRUSS HEAD TAPPING SCREW
- G
- 0
- Weight: 0.0048000
| Measurement System: | ImperialImperial |
| Drive / Head: | Phillips Truss HeadPhillips Truss Head |
| Diameter: | #10#10 |
| Length: | 1/2"1/2" |
| Finish: | ZincZinc |
- F-67054
- #10 X 3/4 ZINC PLATED PHILLIPS TRUSS HEAD TAPPING SCREW
- C
- 0
- Weight: 0.0059100
| Measurement System: | ImperialImperial |
| Drive / Head: | Phillips Truss HeadPhillips Truss Head |
| Diameter: | #10#10 |
| Length: | 3/4"3/4" |
| Finish: | ZincZinc |
- F-67055
- #10 X 1 ZINC PLATED PHILLIPS TRUSS HEAD TAPPING SCREW
- A
- 0
- Weight: 0.0071000
| Measurement System: | ImperialImperial |
| Drive / Head: | Phillips Truss HeadPhillips Truss Head |
| Diameter: | #10#10 |
| Length: | 1"1" |
| Finish: | ZincZinc |
- F-67094
- 1/4 X 3/4 ZINC PLATED PHILLIPS TRUSS HEAD TAPPING SCREW
- G
- 0
- Weight: 0.0115300
| Measurement System: | ImperialImperial |
| Drive / Head: | Phillips Truss HeadPhillips Truss Head |
| Diameter: | 1/41/4 |
| Length: | 3/4"3/4" |
| Finish: | ZincZinc |
- F-67095
- 1/4 X 1 ZINC PLATED PHILLIPS TRUSS HEAD TAPPING SCREW TYPE A
- B
- 0
- Weight: 0.0137300
| Measurement System: | ImperialImperial |
| Drive / Head: | Phillips Truss HeadPhillips Truss Head |
| Diameter: | 1/4"1/4" |
| Length: | 1"1" |
| Finish: | ZincZinc |
- F-67097
- 1/4 X 1-1/2 ZINC PLATED PHILLIPS TRUSS HEAD TAPPING SCREW
- G
- 0
- Weight: 0.0181400
| Measurement System: | ImperialImperial |
| Drive / Head: | Phillips Truss HeadPhillips Truss Head |
| Diameter: | 1/4"1/4" |
| Length: | 1 1/2"1 1/2" |
| Finish: | ZincZinc |
- F-67512
- #6 X 1/2 ZINC PLATED SLOTTED PAN HEAD TAPPING SCREW
- E
- 0
- Weight: 0.0022000
| Measurement System: | ImperialImperial |
| Drive / Head: | Slotted Pan HeadSlotted Pan Head |
| Diameter: | #6#6 |
| Length: | 1/2"1/2" |
| Finish: | ZincZinc |
- F-67522
- #7 X 1/2 ZINC PLATED SLOTTED PAN HEAD TAPPING SCREW
- E
- 0
- Weight: 0.0028000
| Measurement System: | ImperialImperial |
| Drive / Head: | Slotted Pan HeadSlotted Pan Head |
| Diameter: | #7#7 |
| Length: | 1/2"1/2" |
| Finish: | ZincZinc |
- F-67531
- #8 X 3/8 ZINC PLATED SLOTTED PAN HEAD TAPPING SCREW
- E
- 0
- Weight: 0.0028000
| Measurement System: | ImperialImperial |
| Drive / Head: | Slotted Pan HeadSlotted Pan Head |
| Diameter: | #8#8 |
| Length: | 3/8"3/8" |
| Finish: | ZincZinc |
- F-67532
- #8 X 1/2 ZINC PLATED SLOTTED PAN HEAD TAPPING SCREW
- E
- 0
- Weight: 0.0033100
| Measurement System: | ImperialImperial |
| Drive / Head: | Slotted Pan HeadSlotted Pan Head |
| Diameter: | #8#8 |
| Length: | 1/2"1/2" |
| Finish: | ZincZinc |
- F-67534
- #8 X 3/4 ZINC PLATED SLOTTED PAN HEAD TAPPING SCREW
- E
- 0
- Weight: 0.0041900
| Measurement System: | ImperialImperial |
| Drive / Head: | Slotted Pan HeadSlotted Pan Head |
| Diameter: | #8#8 |
| Length: | 3/4"3/4" |
| Finish: | ZincZinc |
- F-67552
- #10 X 1/2 ZINC PLATED SLOTTED PAN HEAD TAPPING SCREW
- E
- 0
- Weight: 0.0048000
| Measurement System: | ImperialImperial |
| Drive / Head: | Slotted Pan HeadSlotted Pan Head |
| Diameter: | #10#10 |
| Length: | 1/2"1/2" |
| Finish: | ZincZinc |
- F-67554
- #10 X 3/4 ZINC PLATED SLOTTED PAN HEAD TAPPING SCREW
- E
- 0
- Weight: 0.0059100
| Measurement System: | ImperialImperial |
| Drive / Head: | Slotted Pan HeadSlotted Pan Head |
| Diameter: | #10#10 |
| Length: | 3/4"3/4" |
| Finish: | ZincZinc |
- F-67561
- #10 X 2-1/2 ZINC PLATED SLOTTED PAN HEAD TAPPING SCREW
- G
- 0
- Weight: 0.0143300
| Measurement System: | ImperialImperial |
| Drive / Head: | Slotted Pan HeadSlotted Pan Head |
| Diameter: | #10#10 |
| Length: | 2 1/2"2 1/2" |
| Finish: | ZincZinc |
- F-67572
- #12 X 1/2 ZINC PLATED SLOTTED PAN HEAD TAPPING SCREW
- D
- 0
- Weight: 0.0066100
| Measurement System: | ImperialImperial |
| Drive / Head: | Slotted Pan HeadSlotted Pan Head |
| Diameter: | #12#12 |
| Length: | 1/2"1/2" |
| Finish: | ZincZinc |
- F-67574
- #12 X 3/4 ZINC PLATED SLOTTED PAN HEAD TAPPING SCREW
- D
- 0
- Weight: 0.0081100
| Measurement System: | ImperialImperial |
| Drive / Head: | Slotted Pan HeadSlotted Pan Head |
| Diameter: | #12#12 |
| Length: | 3/4"3/4" |
| Finish: | ZincZinc |
- F-67575
- #12 X 1 ZINC PLATED SLOTTED PAN HEAD TAPPING SCREW
- E
- 0
- Weight: 0.0097000
| Measurement System: | ImperialImperial |
| Drive / Head: | Slotted Pan HeadSlotted Pan Head |
| Diameter: | #12#12 |
| Length: | 1"1" |
| Finish: | ZincZinc |
- F-67594
- 1/4 X 3/4 ZINC PLATED SLOTTED PAN HEAD TAPPING SCREW
- D
- 0
- Weight: 0.0115300
| Measurement System: | ImperialImperial |
| Drive / Head: | Slotted Pan HeadSlotted Pan Head |
| Diameter: | 1/41/4 |
| Length: | 3/4"3/4" |
| Finish: | ZincZinc |
- F-67655
- #10 X 1 ZINC PLATED SQUARE DRIVE FLAT HEAD TAPPING SCREW TYPE A
- C
- 0
- Weight: 0.0060800
| Measurement System: | ImperialImperial |
| Drive / Head: | Square Flat HeadSquare Flat Head |
| Diameter: | #10#10 |
| Length: | 1"1" |
| Finish: | ZincZinc |
- F-67656
- #10 X 1-1/4 ZINC PLATED SQUARE DRIVE FLAT HEAD TAPPING SCREW TYPE A
- C
- 0
- Weight: 0.0072800
| Measurement System: | ImperialImperial |
| Drive / Head: | Square Flat HeadSquare Flat Head |
| Diameter: | #10#10 |
| Length: | 1 1/4"1 1/4" |
| Finish: | ZincZinc |
- F-67657
- #10 X 1-1/2 ZINC PLATED SQUARE DRIVE FLAT HEAD TAPPING SCREW TYPE A
- C
- 0
- Weight: 0.0083800
| Measurement System: | ImperialImperial |
| Drive / Head: | Square Flat HeadSquare Flat Head |
| Diameter: | #10#10 |
| Length: | 1 1/2"1 1/2" |
| Finish: | ZincZinc |
- F-67732
- #8 X 1/2 ZINC PLATED SQUARE PAN HEAD TAPPING SCREW
- E
- 0
- Weight: 0.0032400
| Measurement System: | ImperialImperial |
| Drive / Head: | Square Pan HeadSquare Pan Head |
| Diameter: | #8#8 |
| Length: | 1/2"1/2" |
| Finish: | ZincZinc |
- F-67752
- #10 X 1/2 ZINC PLATED SQUARE PAN HEAD TAPPING SCREW TYPE A
- B
- 0
- Weight: 0.0048000
| Measurement System: | ImperialImperial |
| Drive / Head: | Square Pan HeadSquare Pan Head |
| Diameter: | #10#10 |
| Length: | 1/2"1/2" |
| Finish: | ZincZinc |
- F-67754
- #10 X 3/4 ZINC PLATED SQUARE PAN HEAD TAPPING SCREW
- C
- 0
- Weight: 0.0059000
| Measurement System: | ImperialImperial |
| Drive / Head: | Square Pan HeadSquare Pan Head |
| Diameter: | #10#10 |
| Length: | 3/4"3/4" |
| Finish: | ZincZinc |
- F-67755
- #10 X 1 ZINC PLATED SQUARE PAN HEAD TYPE A TAPPING SCREW
- E
- 0
- Weight: 0.0071000
| Measurement System: | ImperialImperial |
| Drive / Head: | Square Pan HeadSquare Pan Head |
| Diameter: | #10#10 |
| Length: | 1"1" |
| Finish: | ZincZinc |
- F-67756
- #10 X 1-1/4 ZINC PLATED SQUARE DRIVE PAN HEAD TAPPING SCREW TYPE A
- E
- 0
- Weight: 0.0083000
| Measurement System: | ImperialImperial |
| Drive / Head: | Square Pan HeadSquare Pan Head |
| Diameter: | #10#10 |
| Length: | 1 1/4"1 1/4" |
| Finish: | ZincZinc |
- F-90121
- #10 X 1/2 STAINLESS STEEL HEX WASHER HEAD SLOTTED TAPPING SCREW TYPE A GRADE 304 (18-8)
- A
- 0
- Weight: 0.0046000
| Measurement System: | ImperialImperial |
| Drive / Head: | Slotted Hex Washer HeadSlotted Hex Washer Head |
| Diameter: | #10#10 |
| Length: | 1/2"1/2" |
| Finish: | Stainless SteelStainless Steel |
- F-90123A
- #10 X 7/8 STAINLESS STEEL HEX WASHER HEAD SLOTTED TAPPING SCREW GRADE 304 (18-8)
- A
- 0
- Weight: 0.0067000
| Measurement System: | ImperialImperial |
| Drive / Head: | Slotted Hex Washer HeadSlotted Hex Washer Head |
| Diameter: | #10#10 |
| Length: | 7/8"7/8" |
| Finish: | Stainless SteelStainless Steel |
- F-90124
- #10 X 1 STAINLESS STEEL HEX WASHER HEAD SLOTTED TAPPING SCREW GRADE 304 (18-8)
- C
- 0
- Weight: 0.0073000
| Measurement System: | ImperialImperial |
| Drive / Head: | Slotted Hex Washer HeadSlotted Hex Washer Head |
| Diameter: | #10#10 |
| Length: | 1"1" |
| Finish: | Stainless SteelStainless Steel |
- F-90125
- #10 X 1-1/4 STAINLESS STEEL HEX WASHER HEAD SLOTTED TAPPING SCREW GRADE 304 (18-8)
- E
- 0
- Weight: 0.0084000
| Measurement System: | ImperialImperial |
| Drive / Head: | Slotted Hex Washer HeadSlotted Hex Washer Head |
| Diameter: | #10#10 |
| Length: | 1 1/4"1 1/4" |
| Finish: | Stainless SteelStainless Steel |
- F-90144
- #12 X 1 STAINLESS STEEL HEX WASHER HEAD SLOTTED TAPPING SCREW GRADE 304 (18-8)
- G
- 0
- Weight: 0.0088000
| Measurement System: | ImperialImperial |
| Drive / Head: | Slotted Hex Washer HeadSlotted Hex Washer Head |
| Diameter: | #12#12 |
| Length: | 1"1" |
| Finish: | Stainless SteelStainless Steel |
- F-90146
- #12 X 1-1/2 STAINLESS STEEL HEX WASHER HEAD SLOTTED TAPPING SCREW GRADE 304 (18-8)
- G
- 0
- Weight: 0.0130000
| Measurement System: | ImperialImperial |
| Drive / Head: | Slotted Hex Washer HeadSlotted Hex Washer Head |
| Diameter: | #12#12 |
| Length: | 1 1/2"1 1/2" |
| Finish: | Stainless SteelStainless Steel |
- F-90161
- 1/4 X 3/4 STAINLESS STEEL HEX WASHER HEAD SLOTTED TAPPING SCREW GRADE 304 (18-8)
- B
- 0
- Weight: 0.0123000
| Measurement System: | ImperialImperial |
| Drive / Head: | Slotted Hex Washer HeadSlotted Hex Washer Head |
| Diameter: | 1/41/4 |
| Length: | 3/4"3/4" |
| Finish: | Stainless SteelStainless Steel |
- F-90162
- 1/4 X 1 STAINLESS STEEL HEX WASHER HEAD SLOTTED TAPPING SCREW GRADE 304 (18-8)
- B
- 0
- Weight: 0.0150000
| Measurement System: | ImperialImperial |
| Drive / Head: | Slotted Hex Washer HeadSlotted Hex Washer Head |
| Diameter: | 1/4"1/4" |
| Length: | 1"1" |
| Finish: | Stainless SteelStainless Steel |
- F-90164
- 1/4 X 1-1/2 STAINLESS STEEL HEX WASHER HEAD SLOTTED TAPPING SCREW GRADE 304 (18-8)
- B
- 0
- Weight: 0.0189000
| Measurement System: | ImperialImperial |
| Drive / Head: | Slotted Hex Washer HeadSlotted Hex Washer Head |
| Diameter: | 1/4"1/4" |
| Length: | 1 1/2"1 1/2" |
| Finish: | Stainless SteelStainless Steel |
- F-90202
- #4 X 3/4 STAINLESS STEEL PHILLIPS FLAT HEAD TAPPING SCREW GRADE 304 (18-8)
- G
- 0
- Weight: 0.0013000
| Measurement System: | ImperialImperial |
| Drive / Head: | Phillips Flat HeadPhillips Flat Head |
| Diameter: | #4#4 |
| Length: | 3/4"3/4" |
| Finish: | Stainless SteelStainless Steel |
- F-90251
- #6 X 1/2 STAINLESS STEEL PHILLIPS FLAT HEAD TAPPING SCREW GRADE 304 (18-8)
- C
- 0
- Weight: 0.0015800
| Measurement System: | ImperialImperial |
| Drive / Head: | Phillips Flat HeadPhillips Flat Head |
| Diameter: | #6#6 |
| Length: | 1/2"1/2" |
| Finish: | Stainless SteelStainless Steel |
- F-90252
- #6 X 5/8 STAINLESS STEEL PHILLIPS FLAT HEAD TAPPING SCREW GRADE 304 (18-8)
- C
- 0
- Weight: 0.0019300
| Measurement System: | ImperialImperial |
| Drive / Head: | Phillips Flat HeadPhillips Flat Head |
| Diameter: | #6#6 |
| Length: | 5/8"5/8" |
| Finish: | Stainless SteelStainless Steel |
- F-90253
- #6 X 3/4 STAINLESS STEEL PHILLIPS FLAT HEAD TAPPING SCREW GRADE 304 (18-8)
- C
- 0
- Weight: 0.0026000
| Measurement System: | ImperialImperial |
| Drive / Head: | Phillips Flat HeadPhillips Flat Head |
| Diameter: | #6#6 |
| Length: | 3/4"3/4" |
| Finish: | Stainless SteelStainless Steel |
- F-90254
- #6 X 1 STAINLESS STEEL PHILLIPS FLAT HEAD TAPPING SCREW GRADE 304 (18-8)
- C
- 0
- Weight: 0.0030500
| Measurement System: | ImperialImperial |
| Drive / Head: | Phillips Flat HeadPhillips Flat Head |
| Diameter: | #6#6 |
| Length: | 1"1" |
| Finish: | Stainless SteelStainless Steel |
- F-90261
- #8 X 1/2 STAINLESS STEEL PHILLIPS FLAT HEAD TAPPING SCREW GRADE 304 (18-8)
- E
- 0
- Weight: 0.0023700
| Measurement System: | ImperialImperial |
| Drive / Head: | Phillips Flat HeadPhillips Flat Head |
| Diameter: | #8#8 |
| Length: | 1/2"1/2" |
| Finish: | Stainless SteelStainless Steel |
- F-90262
- #8 X 5/8 STAINLESS STEEL PHILLIPS FLAT HEAD TAPPING SCREW GRADE 304 (18-8)
- C
- 0
- Weight: 0.0028000
| Measurement System: | ImperialImperial |
| Drive / Head: | Phillips Flat HeadPhillips Flat Head |
| Diameter: | #8#8 |
| Length: | 5/8"5/8" |
| Finish: | Stainless SteelStainless Steel |
- F-90263
- #8 X 3/4 STAINLESS STEEL PHILLIPS FLAT HEAD TAPPING SCREW GRADE 304 (18-8)
- A
- 0
- Weight: 0.0032900
| Measurement System: | ImperialImperial |
| Drive / Head: | Phillips Flat HeadPhillips Flat Head |
| Diameter: | #8#8 |
| Length: | 3/4"3/4" |
| Finish: | Stainless SteelStainless Steel |
- F-90264
- #8 X 1 STAINLESS STEEL PHILLIPS FLAT HEAD TAPPING SCREW GRADE 304 (18-8)
- D
- 0
- Weight: 0.0040000
| Measurement System: | ImperialImperial |
| Drive / Head: | Phillips Flat HeadPhillips Flat Head |
| Diameter: | #8#8 |
| Length: | 1"1" |
| Finish: | Stainless SteelStainless Steel |
- F-90265
- #8 X 1-1/4 STAINLESS STEEL PHILLIPS FLAT HEAD TAPPING SCREW GRADE 304 (18-8)
- D
- 0
- Weight: 0.0052200
| Measurement System: | ImperialImperial |
| Drive / Head: | Phillips Flat HeadPhillips Flat Head |
| Diameter: | #8#8 |
| Length: | 1 1/4"1 1/4" |
| Finish: | Stainless SteelStainless Steel |
- F-90266
- #8 X 1-1/2 STAINLESS STEEL PHILLIPS FLAT HEAD TAPPING SCREW GRADE 304 (18-8)
- G
- 0
- Weight: 0.0062000
| Measurement System: | ImperialImperial |
| Drive / Head: | Phillips Flat HeadPhillips Flat Head |
| Diameter: | #8#8 |
| Length: | 1 1/2"1 1/2" |
| Finish: | Stainless SteelStainless Steel |
- F-90268
- #8 X 2 STAINLESS STEEL PHILLIPS FLAT HEAD TAPPING SCREW GRADE 304 (18-8)
- G
- 0
- Weight: 0.0008000
| Measurement System: | ImperialImperial |
| Drive / Head: | Phillips Flat HeadPhillips Flat Head |
| Diameter: | #8#8 |
| Length: | 2"2" |
| Finish: | Stainless SteelStainless Steel |
- F-90281-316
- #10 X 1/2 STAINLESS STEEL UNDERCUT PHILLIPS FLAT TAPPING SCREW GRADE 316
- B
- 0
- Weight: 0.0033000
| Measurement System: | ImperialImperial |
| Drive / Head: | Phillips Flat HeadPhillips Flat Head |
| Diameter: | #10#10 |
| Length: | 1/2"1/2" |
| Finish: | Stainless SteelStainless Steel |
- F-90283
- #10 X 3/4 STAINLESS STEEL PHILLIPS FLAT HEAD TAPPING SCREW GRADE 304 (18-8)
- G
- 0
- Weight: 0.0045000
| Measurement System: | ImperialImperial |
| Drive / Head: | Phillips Flat HeadPhillips Flat Head |
| Diameter: | #10#10 |
| Length: | 3/4"3/4" |
| Finish: | Stainless SteelStainless Steel |
- F-90285
- #10 X 1-1/4 STAINLESS STEEL PHILLIPS FLAT HEAD TAPPING SCREW GRADE 304 (18-8)
- D
- 0
- Weight: 0.0065700
| Measurement System: | ImperialImperial |
| Drive / Head: | Phillips Flat HeadPhillips Flat Head |
| Diameter: | #10#10 |
| Length: | 1 1/4"1 1/4" |
| Finish: | Stainless SteelStainless Steel |
- F-90304
- #12 X 1 STAINLESS STEEL PHILLIPS FLAT HEAD TAPPING SCREW GRADE 304 (18-8)
- G
- 0
- Weight: 0.0081000
| Measurement System: | ImperialImperial |
| Drive / Head: | Phillips Flat HeadPhillips Flat Head |
| Diameter: | #12#12 |
| Length: | 1"1" |
| Finish: | Stainless SteelStainless Steel |
- F-90306
- #12 X 1-1/2 STAINLESS STEEL PHILLIPS FLAT HEAD TAPPING SCREW GRADE 304 (18-8)
- C
- 0
- Weight: 0.0114000
| Measurement System: | ImperialImperial |
| Drive / Head: | Phillips Flat HeadPhillips Flat Head |
| Diameter: | #12#12 |
| Length: | 1 1/2"1 1/2" |
| Finish: | Stainless SteelStainless Steel |
- F-90310
- #12 X 2-1/2 STAINLESS STEEL PHILLIPS FLAT HEAD TAPPING SCREW GRADE 304 (18-8)
- E
- 0
- Weight: 0.0175000
| Measurement System: | ImperialImperial |
| Drive / Head: | Phillips Flat HeadPhillips Flat Head |
| Diameter: | #12#12 |
| Length: | 2 1/2"2 1/2" |
| Finish: | Stainless SteelStainless Steel |
- F-90451
- #6 X 1/2 STAINLESS STEEL PHILLIPS OVAL HEAD TAPPING SCREW GRADE 304 (18-8)
- G
- 0
- Weight: 0.0017000
| Measurement System: | ImperialImperial |
| Drive / Head: | Phillips Oval HeadPhillips Oval Head |
| Diameter: | #6#6 |
| Length: | 1/2"1/2" |
| Finish: | Stainless SteelStainless Steel |
- F-90452
- #6 X 5/8 STAINLESS STEEL PHILLIPS OVAL HEAD TAPPING SCREW GRADE 304 (18-8)
- G
- 0
- Weight: 0.0020600
| Measurement System: | ImperialImperial |
| Drive / Head: | Phillips Oval HeadPhillips Oval Head |
| Diameter: | #6#6 |
| Length: | 5/8"5/8" |
| Finish: | Stainless SteelStainless Steel |
- F-90453
- #6 X 3/4 STAINLESS STEEL PHILLIPS OVAL HEAD TAPPING SCREW GRADE 304 (18-8) TYPE A
- E
- 0
- Weight: 0.0025800
| Measurement System: | ImperialImperial |
| Drive / Head: | Phillips Oval HeadPhillips Oval Head |
| Diameter: | #6#6 |
| Length: | 3/4"3/4" |
| Finish: | Stainless SteelStainless Steel |
- F-90454
- #6 X 1 STAINLESS STEEL PHILLIPS OVAL HEAD TAPPING SCREW GRADE 304 (18-8) TYPE A
- E
- 0
- Weight: 0.0032500
| Measurement System: | ImperialImperial |
| Drive / Head: | Phillips Oval HeadPhillips Oval Head |
| Diameter: | #6#6 |
| Length: | 1"1" |
| Finish: | Stainless SteelStainless Steel |
- F-90460
- #8 X 3/8 STAINLESS STEEL PHILLIPS OVAL HEAD TAPPING SCREW GRADE 304 (18-8)
- G
- 0
- Weight: 0.0023600
| Measurement System: | ImperialImperial |
| Drive / Head: | Phillips Oval HeadPhillips Oval Head |
| Diameter: | #8#8 |
| Length: | 3/8"3/8" |
| Finish: | Stainless SteelStainless Steel |
- F-90461
- #8 X 1/2 STAINLESS STEEL PHILLIPS OVAL HEAD TAPPING SCREW GRADE 304 (18-8) TYPE A
- G
- 0
- Weight: 0.0027500
| Measurement System: | ImperialImperial |
| Drive / Head: | Phillips Oval HeadPhillips Oval Head |
| Diameter: | #8#8 |
| Length: | 1/2"1/2" |
| Finish: | Stainless SteelStainless Steel |
- F-90463
- #8 X 3/4 STAINLESS STEEL PHILLIPS OVAL HEAD TAPPING SCREW GRADE 304 (18-8)
- C
- 0
- Weight: 0.0035700
| Measurement System: | ImperialImperial |
| Drive / Head: | Phillips Oval HeadPhillips Oval Head |
| Diameter: | #8#8 |
| Length: | 3/4"3/4" |
| Finish: | Stainless SteelStainless Steel |
- F-90464
- #8 X 1 STAINLESS STEEL PHILLIPS OVAL HEAD TAPPING SCREW GRADE 304 (18-8) TYPE A
- C
- 0
- Weight: 0.0045500
| Measurement System: | ImperialImperial |
| Drive / Head: | Phillips Oval HeadPhillips Oval Head |
| Diameter: | #8#8 |
| Length: | 1"1" |
| Finish: | Stainless SteelStainless Steel |
- F-90465
- #8 X 1-1/4 STAINLESS STEEL PHILLIPS OVAL HEAD TAPPING SCREW GRADE 304 (18-8)
- G
- 0
- Weight: 0.0055000
| Measurement System: | ImperialImperial |
| Drive / Head: | Phillips Oval HeadPhillips Oval Head |
| Diameter: | #8#8 |
| Length: | 1 1/4"1 1/4" |
| Finish: | Stainless SteelStainless Steel |
- F-90483
- #10 X 3/4 STAINLESS STEEL PHILLIPS OVAL HEAD TAPPING SCREW GRADE 304 (18-8) TYPE A
- G
- 0
- Weight: 0.0050600
| Measurement System: | ImperialImperial |
| Drive / Head: | Phillips Oval HeadPhillips Oval Head |
| Diameter: | #10#10 |
| Length: | 3/4"3/4" |
| Finish: | Stainless SteelStainless Steel |
- F-90487
- #10 X 1-3/4 STAINLESS STEEL PHILLIPS OVAL HEAD TAPPING SCREW GRADE 304 (18-8) TYPE A
- G
- 0
- Weight: 0.0091700
| Measurement System: | ImperialImperial |
| Drive / Head: | Phillips Oval HeadPhillips Oval Head |
| Diameter: | #10#10 |
| Length: | 1 3/4"1 3/4" |
| Finish: | Stainless SteelStainless Steel |
- F-90646
- #2 X 3/8 STAINLESS STEEL PHILLIPS PAN TAPPING SCREW GRADE 304 (18-8)
- G
- 0
- Weight: 0.0006000
| Measurement System: | ImperialImperial |
| Drive / Head: | Phillips Pan HeadPhillips Pan Head |
| Diameter: | #2#2 |
| Length: | 3/8"3/8" |
| Finish: | Stainless SteelStainless Steel |
- F-90647-0.75
- #4 X 3/4 STAINLESS STEEL PHILLIPS PAN TAPPING SCREW GRADE 304 (18-8)
- G
- 0
- Weight: 0.0016000
| Measurement System: | ImperialImperial |
| Drive / Head: | Phillips Pan HeadPhillips Pan Head |
| Diameter: | #4#4 |
| Length: | 3/4"3/4" |
| Finish: | Stainless SteelStainless Steel |
- F-90650
- #6 X 3/8 STAINLESS STEEL PHILLIPS PAN HEAD TAPPING SCREW GRADE 304 (18-8)
- G
- 0
- Weight: 0.0018000
| Measurement System: | ImperialImperial |
| Drive / Head: | Phillips Pan HeadPhillips Pan Head |
| Diameter: | #6#6 |
| Length: | 3/8"3/8" |
| Finish: | Stainless SteelStainless Steel |
- F-90651
- #6 X 1/2 STAINLESS STEEL PHILLIPS PAN HEAD TAPPING SCREW TYPE A GRADE 304 (18-8)
- C
- 0
- Weight: 0.0021700
| Measurement System: | ImperialImperial |
| Drive / Head: | Phillips Pan HeadPhillips Pan Head |
| Diameter: | #6#6 |
| Length: | 1/2"1/2" |
| Finish: | Stainless SteelStainless Steel |
- F-90652
- #6 X 5/8 STAINLESS STEEL PHILLIPS PAN HEAD TAPPING SCREW TYPE A GRADE 304 (18-8)
- G
- 0
- Weight: 0.0023500
| Measurement System: | ImperialImperial |
| Drive / Head: | Phillips Pan HeadPhillips Pan Head |
| Diameter: | #6#6 |
| Length: | 5/8"5/8" |
| Finish: | Stainless SteelStainless Steel |
- F-90653
- #6 X 3/4 STAINLESS STEEL PHILLIPS PAN HEAD TAPPING SCREW TYPE A GRADE 304 (18-8)
- D
- 0
- Weight: 0.0028000
| Measurement System: | ImperialImperial |
| Drive / Head: | Phillips Pan HeadPhillips Pan Head |
| Diameter: | #6#6 |
| Length: | 3/4"3/4" |
| Finish: | Stainless SteelStainless Steel |
- F-90654
- #6 X 1 STAINLESS STEEL PHILLIPS PAN HEAD TAPPING SCREW GRADE 304 (18-8)
- E
- 0
- Weight: 0.0035500
| Measurement System: | ImperialImperial |
| Drive / Head: | Phillips Pan HeadPhillips Pan Head |
| Diameter: | #6#6 |
| Length: | 1"1" |
| Finish: | Stainless SteelStainless Steel |
- F-90661
- #8 X 1/2 STAINLESS STEEL PHILLIPS PAN HEAD TAPPING SCREW GRADE 304 (18-8)
- C
- 0
- Weight: 0.0031900
| Measurement System: | ImperialImperial |
| Drive / Head: | Phillips Pan HeadPhillips Pan Head |
| Diameter: | #8#8 |
| Length: | 1/2"1/2" |
| Finish: | Stainless SteelStainless Steel |
- F-90663
- #8 X 3/4 STAINLESS STEEL PHILLIPS PAN HEAD TAPPING SCREW GRADE 304 (18-8)
- E
- 0
- Weight: 0.0041700
| Measurement System: | ImperialImperial |
| Drive / Head: | Phillips Pan HeadPhillips Pan Head |
| Diameter: | #8#8 |
| Length: | 3/4"3/4" |
| Finish: | Stainless SteelStainless Steel |
- F-90664
- #8 X 1 STAINLESS STEEL PHILLIPS PAN HEAD TAPPING SCREW GRADE 304 (18-8) - TYPE A
- D
- 0
- Weight: 0.0054000
| Measurement System: | ImperialImperial |
| Drive / Head: | Phillips Pan HeadPhillips Pan Head |
| Diameter: | #8#8 |
| Length: | 1"1" |
| Finish: | Stainless SteelStainless Steel |
- F-90666
- #8 X 1-1/2 STAINLESS STEEL PHILLIPS PAN HEAD TAPPING SCREW GRADE 304 (18-8)
- G
- 0
- Weight: 0.0069700
| Measurement System: | ImperialImperial |
| Drive / Head: | Phillips Pan HeadPhillips Pan Head |
| Diameter: | #8#8 |
| Length: | 1 1/2"1 1/2" |
| Finish: | Stainless SteelStainless Steel |
- F-90681
- #10 X 1/2 STAINLESS STEEL PHILLIPS PAN HEAD TAPPING SCREW GRADE 304 (18-8)
- G
- 0
- Weight: 0.0045600
| Measurement System: | ImperialImperial |
| Drive / Head: | Phillips Pan HeadPhillips Pan Head |
| Diameter: | #10#10 |
| Length: | 1/2"1/2" |
| Finish: | Stainless SteelStainless Steel |
- F-90683
- #10 X 3/4 STAINLESS STEEL PHILLIPS PAN HEAD TAPPING SCREW GRADE 304 (18-8) - TYPE A
- D
- 0
- Weight: 0.0055700
| Measurement System: | ImperialImperial |
| Drive / Head: | Phillips Pan HeadPhillips Pan Head |
| Diameter: | #10#10 |
| Length: | 3/4"3/4" |
| Finish: | Stainless SteelStainless Steel |
- F-90684
- #10 X 1 STAINLESS STEEL PHILLIPS PAN HEAD TAPPING SCREW GRADE 304 (18-8)
- C
- 0
- Weight: 0.0073000
| Measurement System: | ImperialImperial |
| Drive / Head: | Phillips Pan HeadPhillips Pan Head |
| Diameter: | #10#10 |
| Length: | 1"1" |
| Finish: | Stainless SteelStainless Steel |
- F-90686
- #10 X 1-1/2 STAINLESS STEEL PHILLIPS PAN HEAD TAPPING SCREW GRADE 304 (18-8) - TYPE A
- G
- 0
- Weight: 0.0112000
| Measurement System: | ImperialImperial |
| Drive / Head: | Phillips Pan HeadPhillips Pan Head |
| Diameter: | #10#10 |
| Length: | 1 1/2"1 1/2" |
| Finish: | Stainless SteelStainless Steel |
- F-90702
- #12 X 5/8 STAINLESS STEEL PHILLIPS PAN HEAD TAPPING SCREW GRADE 304 (18-8) - TYPE A
- E
- 0
- Weight: 0.0074000
| Measurement System: | ImperialImperial |
| Drive / Head: | Phillips Pan HeadPhillips Pan Head |
| Diameter: | #12#12 |
| Length: | 5/8"5/8" |
| Finish: | Stainless SteelStainless Steel |
- F-90704
- #12 X 1 STAINLESS STEEL PHILLIPS PAN HEAD TAPPING SCREW GRADE 304 (18-8) - TYPE A
- E
- 0
- Weight: 0.0094200
| Measurement System: | ImperialImperial |
| Drive / Head: | Phillips Pan HeadPhillips Pan Head |
| Diameter: | #12#12 |
| Length: | 1"1" |
| Finish: | Stainless SteelStainless Steel |
- F-90706
- #12 X 1-1/2 STAINLESS STEEL PHILLIPS PAN HEAD TAPPING SCREW GRADE 304 (18-8)
- G
- 0
- Weight: 0.0125000
| Measurement System: | ImperialImperial |
| Drive / Head: | Phillips Pan HeadPhillips Pan Head |
| Diameter: | #12#12 |
| Length: | 1 1/2"1 1/2" |
| Finish: | Stainless SteelStainless Steel |
- F-90724
- 1/4 X 1 STAINLESS STEEL PHILLIPS PAN HEAD TAPPING SCREW TYPE A GRADE 304 (18-8)
- E
- 0
- Weight: 0.0134600
| Measurement System: | ImperialImperial |
| Drive / Head: | Phillips Pan HeadPhillips Pan Head |
| Diameter: | 1/41/4 |
| Length: | 1"1" |
| Finish: | Stainless SteelStainless Steel |
- F-90725
- 1/4 X 1-1/4 STAINLESS STEEL PHILLIPS PAN HEAD TAPPING SCREW TYPE A GRADE 304 (18-8)
- G
- 0
- Weight: 0.0156000
| Measurement System: | ImperialImperial |
| Drive / Head: | Phillips Pan HeadPhillips Pan Head |
| Diameter: | 1/41/4 |
| Length: | 1 1/4"1 1/4" |
| Finish: | Stainless SteelStainless Steel |
- F-90726
- 1/4 X 1-1/2 STAINLESS STEEL PHILLIPS PAN HEAD TAPPING SCREW GRADE 304 (18-8)
- E
- 0
- Weight: 0.0175000
| Measurement System: | ImperialImperial |
| Drive / Head: | Phillips Pan HeadPhillips Pan Head |
| Diameter: | 1/41/4 |
| Length: | 1 1/2"1 1/2" |
| Finish: | Stainless SteelStainless Steel |
- F-90728
- 1/4 X 2 STAINLESS STEEL PHILLIPS PAN HEAD TAPPING SCREW GRADE 304 (18-8)
- E
- 0
- Weight: 0.0227000
| Measurement System: | ImperialImperial |
| Drive / Head: | Phillips Pan HeadPhillips Pan Head |
| Diameter: | 1/41/4 |
| Length: | 2"2" |
| Finish: | Stainless SteelStainless Steel |
- F-90732
- 1/4 X 3 STAINLESS STEEL PHILLIPS PAN HEAD TAPPING SCREW GRADE 304 (18-8)
- G
- 0
- Weight: 0.0314000
| Measurement System: | ImperialImperial |
| Drive / Head: | Phillips Pan HeadPhillips Pan Head |
| Diameter: | 1/41/4 |
| Length: | 3"3" |
| Finish: | Stainless SteelStainless Steel |
- F-90860
- #8 X 3/8 STAINLESS STEEL PHILLIPS TRUSS HEAD TAPPING SCREW GRADE 304 (18-8)
- C
- 0
- Weight: 0.0031000
| Measurement System: | ImperialImperial |
| Drive / Head: | Phillips Truss HeadPhillips Truss Head |
| Diameter: | #8#8 |
| Length: | 3/8"3/8" |
| Finish: | Stainless SteelStainless Steel |
- F-90862
- #8 X 5/8 STAINLESS STEEL PHILLIPS TRUSS HEAD TAPPING SCREW GRADE 304 (18-8)
- E
- 0
- Weight: 0.0035000
| Measurement System: | ImperialImperial |
| Drive / Head: | Phillips Truss HeadPhillips Truss Head |
| Diameter: | #8#8 |
| Length: | 5/8"5/8" |
| Finish: | Stainless SteelStainless Steel |
- F-90862-B
- #8 X 5/8 STAINLESS STEEL BLACK OXIDE PHILLIPS TRUSS HEAD TAPPING SCREW GRADE 304 (18-8)
- C
- 0
- Weight: 0.0046000
| Measurement System: | ImperialImperial |
| Drive / Head: | Phillips Truss HeadPhillips Truss Head |
| Diameter: | #8#8 |
| Length: | 5/8"5/8" |
| Finish: | Stainless SteelStainless Steel |
- F-90880
- #10 X 3/8 STAINLESS STEEL PHILLIPS TRUSS HEAD TAPPING SCREW GRADE 304 (18-8)
- G
- 0
- Weight: 0.0044000
| Measurement System: | ImperialImperial |
| Drive / Head: | Phillips Truss HeadPhillips Truss Head |
| Diameter: | #10#10 |
| Length: | 3/8"3/8" |
| Finish: | Stainless SteelStainless Steel |
- F-90883
- #10 X 3/4 STAINLESS STEEL PHILLIPS TRUSS HEAD TAPPING SCREW GRADE 304 (18-8)
- C
- 0
- Weight: 0.0060000
| Measurement System: | ImperialImperial |
| Drive / Head: | Phillips Truss HeadPhillips Truss Head |
| Diameter: | #10#10 |
| Length: | 3/4"3/4" |
| Finish: | Stainless SteelStainless Steel |
- F-90887
- #10 X 1-3/4 STAINLESS STEEL PHILLIPS TRUSS HEAD TAPPING SCREW GRADE 304 (18-8)
- E
- 0
- Weight: 0.0111000
| Measurement System: | ImperialImperial |
| Drive / Head: | Phillips Truss HeadPhillips Truss Head |
| Diameter: | #10#10 |
| Length: | 1 3/4"1 3/4" |
| Finish: | Stainless SteelStainless Steel |
No items match your selected filters. Please change or reset your filters to try again.
Page {pageNumber} of {pagesNumber}
DISCLAIMER: Photos are for illustrative purposes only, please see item details or contact Fasteners Direct for exact specifications.
WARNING: Risk of cancer and reproductive harm from exposure to lead. See www.P65Warnings.ca.gov.
Loading
Item(s) Added to Cart
View Cart
View Cart
Wishlist Updated
View Wishlist
View Wishlist
This website uses cookies to ensure you get the best user experience. By continuing to use this site, you agree to our
cookies and terms of use policy.
